How to Set Radio Stations in Toyota Rav4
You can save a radio station in a Toyota RAV4 by tuning to your preferred frequency and holding down a preset button on the screen or dashboard until a beep or highlight confirms it has been stored.
Step-by-Step Guide for Modern RAV4 Models (2013–Present)
Newer RAV4s feature touchscreen infotainment systems such as Entune, Audio Plus, or JBL Premium Audio. These systems allow drivers to save and organize presets across FM, AM, and SiriusXM.
- Turn on the infotainment system → Tap “Audio” and select your source.
- Tune to the station you want → Use the tuning knob, seek button, or on-screen search.
- Press and hold a preset button → Located at the bottom row of the touchscreen.
- Wait for confirmation → The slot updates with the new frequency.
- Repeat the process → Save up to 6 stations per page; some units allow multiple preset pages.
Setting Radio Stations in Older RAV4 Models (Pre-2013)
Older RAV4 radios use physical buttons instead of touchscreens.
- Select AM or FM and use the manual dial or seek button.
- Press and hold the chosen numbered button (1–6) until you hear a confirmation beep.
- That button is now linked to your selected station.
Saving AM, FM, and SiriusXM Presets
Toyota RAV4 systems can store stations across multiple bands:
- FM presets → Usually 18 stations (6 per page, 3 pages).
- AM presets → Typically 12 slots.
- SiriusXM presets → Up to 36 slots, depending on the trim.
Drivers can mix sources into one combined list on newer infotainment units, making it easier to switch between FM talk radio, AM sports, and SiriusXM music.
How Many Stations Can a RAV4 Save?
- Standard Entune systems → 6 presets per screen, multiple pages available.
- Audio Plus → Stores up to 36 combined presets.
- Premium JBL → Offers advanced management, including reordering and grouping.
- Older radios → 6 presets per band, no mixed-source storage.
Switching Between Presets
Switching between stations is straightforward:
- Touchscreen units → Tap the saved preset or use steering-wheel controls.
- Older units → Press the corresponding preset button directly.
Steering-wheel audio controls let you move through saved stations without taking your hands off the wheel, improving safety.
Can You Reorder or Rename Presets?
Yes, modern RAV4 infotainment systems allow reordering.
- Tap Options → Edit Presets.
- Drag and drop saved stations to rearrange them.
- Some versions let you label presets for easier identification.
Troubleshooting Preset Problems
Sometimes, stations may fail to save or disappear. Common causes include:
- Battery disconnect or replacement → Presets reset when power is lost.
- Software update → System refreshes clear stored stations.
- Weak reception → Station may not register properly if the signal drops.
If this happens, retune and re-save your presets. If issues continue, check the antenna or infotainment software update status.
Tips for Better Radio Experience in a Toyota RAV4
- Use scan mode to preview nearby stations automatically.
- Save both local FM and satellite channels for variety.
- For road trips, consider SiriusXM or Bluetooth streaming to avoid regional FM loss.
- Update your infotainment software for better compatibility and stability.
- Combine presets across FM, AM, and SiriusXM to reduce menu navigation.
How to Replace Presets After Battery Change
If your RAV4 battery was replaced, your radio presets may be lost. In that case:
- Re-enter your favorite stations manually.
- Save them again using the same preset process.
- If the system continues to reset, inspect the electrical connections.
For related maintenance, see What kind of battery does a Toyota RAV4 key fob take?.
Related RAV4 Feature Guides
- Does Toyota RAV4 have Apple CarPlay?
- Does Toyota RAV4 have remote start?
- What is the Hold button on Toyota RAV4?
- How to Reset Maintenance Light on Toyota RAV4
People Also Ask (FAQ Section)
How to set radio stations on RAV4?
Tune to your desired station, then press and hold a preset button on the touchscreen or dashboard until a confirmation sound or highlight appears.
How do you reset the radio on a Toyota RAV4?
Turn the vehicle off, disconnect the battery for a few minutes, then reconnect. This resets the radio system and may clear saved presets.
How to save radio stations on Toyota?
Select a station, press and hold a preset button until it saves. Repeat the process for each station you want stored.
How to set the preset radio stations?
Tune to a frequency, then press and hold a preset button until the station appears on the display. Each button stores one frequency.
How to reset radio stations in car?
Clear presets by holding a preset button while on a blank frequency or after a battery reset. Then re-save new stations.
How do I get to the radio on my Toyota RAV4?
Press the “Audio” or “Source” button on the infotainment screen or dashboard controls, then select AM, FM, or SiriusXM to access radio.
How to change RAV4 audio settings?
Go to “Menu → Setup → Audio” on the infotainment screen. Adjust bass, treble, balance, fader, and other sound preferences.
How to use radio in Toyota?
Turn on the infotainment system, select “Audio,” choose AM, FM, or SiriusXM, then tune with seek, scan, or manual options.
How to set up CarPlay on Toyota RAV4?
Connect your iPhone with a USB cable, accept the prompt on the screen, and enable Apple CarPlay. Some newer models also support wireless CarPlay.
